[Diy_efi] Looking for a surge tank with 255 lph in-tank pump

[Mark Linder]

Holley does not carry that any more.  That product is produced Mercury
Marine (they use it on their EFI engines).  There was an agreement
between Holley and Mercury, but that is no longer in effect.  Mercury
will not sell it directly - they say they will only sell one as a
replacement for a faulty unit.  However, some parts dealers will sell
them.  Be prepared - they cost $550+.
 
Mark


-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
On Behalf Of clair.davis at charter.net
Sent: Thursday, April 15, 2004 6:32 PM
To: A list for Do-It-Yourself EFI
Subject: Re: [Diy_efi] Looking for a surge tank with 255 lph in-tank
pump


Like this one?
http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSFP/12-923.html
I'm working on making a separate tank with lift pump to feed the tank,
and then have the tank gravity feed the pressure pump.  Still haven't
sorted it all out yet, but getting there.  Until I get it all done, I'm
just going to keep the tank over half full on the autocross course...

Clair
FTWTX


----- Original Message ----- 
From: "Pete Paraska (REMOVETHIS1ST)" <pparaska at comcast.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, April 15, 2004 3:00 PM
Subject: [Diy_efi] Looking for a surge tank with 255 lph in-tank pump


> The engine will be in the 500+hp range, so I don't think the VW part
discussed
> in the past will work.
>
> What I'd like to have is a surge tank that includes a replaceable 
> 255lph
in-tank
> pump (like the one the 85-97 Ford Mustang guys use (ie, Walbro 
> GCA759). The tank would hold probably 1/2 a liter or more of fuel, 
> with the pump
installed.
>
> Any leads?  I've scoured the search engines, the typical diy-efi 
> vendors,
etc., and
> no joy.  I will end up having one welded up if I can't find one.  Wish

> I
had a TIG
> setup and knew how to use it!
>
>
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
> - -
- - - - - - - - - - - - - - - - - - - - - - - - -
> Pete Paraska  (pparaska "at" comcast.net)   IZCC#15
> 73 240Z V8 - http://alteredz.com
> See http://HybridZ.org for Datsun Z car 
> drivetrain/susp/brake/chassis/body
mods
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org http://lists.diy-efi.org/mailman/listinfo/diy_efi
>

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi