[Diy_efi] tbi stand alone conversion

[Steve Ravet]

OK.  You won't regret buying the service manual, but another option is =
the TPI/TBI swapping book from http://www.jagsthatrun.com  They show TBI =
and TPI harnesses, before and after stripping out the wires for the =
dash, wipers, tach, etc.  The simplest shows only 3 connections after =
all of the relays and other connectors are attached to their appropriate =
places:  TCC, fuel pump, and fused power.  Doesn't get much simpler than =
that.

--steve


________________________________

	From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] =
On Behalf Of Cyberbug53 at aol.com
	Sent: Monday, May 17, 2004 10:22 PM
	To: diy_efi at diy-efi.org
	Subject: Re: [Diy_efi] tbi stand alone conversion
=09
=09
	stand alone is the term used for a harness like a painless harness that =
only runs the engine and/or transmission. I am looking for info on =
converting a factory gm wiring harness into a stand alone=20


_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi