[Diy_efi] RE: diy_efi Digest, Vol 14, Issue 2

justin ivan vlkslvr at hotmail.com
Tue Nov 2 19:44:34 GMT 2004

Interested in knowing if this will work with bosch motronic 2.9 as fitted on 
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] On
>Behalf Of K DANIEL
>Sent: Saturday, October 30, 2004 7:49 AM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] ECU Tester
>I'm new member to DIY-EFI .. I'm engineer I have designed an engine
>simulator for testing engine
>ECU's the simulator generate all the sensors signals required operate the
>ECU under test
>I'm using LABview software to monitor and control the ECU operation
>By now most of the BOSCH MOTRONIC ECU's can be tested...I'm now preparing
>the simulator
>For testing SIMTEC and GM ecru's but the information on SIMTEC and GM ECU 
>very rare... any one can help with
>the pinout or schematics of SIMTEC and GM ECU's
>K Daniel

Express yourself instantly with MSN Messenger! Download today - it's FREE! 

diy_efi mailing list
diy_efi at diy-efi.org

More information about the Diy_efi mailing list