[Diy_efi] Fuel Line pressure drop calculations

[CobraMan]

summit, Jegs, speedway, anywhere that has the push-lock fittings.
----- Original Message -----
From: "Matthew Bormet" <quiktrp at cbcast.com>
To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
Sent: Wednesday, September 08, 2004 9:58 PM
Subject: Re: [Diy_efi] Fuel Line pressure drop calculations


> Where'd you get that 300psi rubber line?  I wouldnt mind using that
instead
> of what I'm using now.
>
> Thanks,
> Matt
>
> ----- Original Message -----
> From: <cobraman at insightbb.com>
> To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
> Sent: Wednesday, September 08, 2004 2:28 PM
> Subject: Re: [Diy_efi] Fuel Line pressure drop calculations
>
>
> > No links or calcs, but I used pre-made 3/8 steel tubing w/ male flair
ends
> > connected to 37 deg. (06 or 08 - don't remember) flair fittings. Get two
> > long
> > pieces and cut one end off each, remove the mail fitting and add the
> > female
> > pieces. Start from both ends and work towards the middle.  Join the ends
> > w/
> > copper ferrel fitting union. Use 300 psi push on (special) rubber hose
for
> > vibration connection. No clamps anywhere and 300 psi capability. TomS
> >
> >
> >> Hi Guy's
> >>
> >> I am fitting some new fuel lines to my car on a custom fuel set-up and
> >> have
> >> been looking for some simple method of calculating the pressure drop I
> >> will
> >> get with different diameters / lengths of pipe at different flow rates.
> >>
> >> Does anyone have a link or can post up the right calculations.
> >>
> >> Thanks
> >>
> >> Hugh
> >>
> >> PS good to see there was some real life in the list again, a couple of
> >> weeks
> >> ago.
> >>
> >> _______________________________________________
> >> diy_efi mailing list
> >> diy_efi at diy-efi.org
> >> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > _______________________________________________
> > diy_efi mailing list
> > diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > ---
> > [This E-mail scanned for viruses by Declude]
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.754 / Virus Database: 504 - Release Date: 9/6/2004
>
> ---
> [This E-mail scanned for viruses by Declude]
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi