[Diy_efi] TurboCad, mech dwgs from ppl on this group ?

hugh at sol.co.uk hugh at sol.co.uk
Mon Aug 1 14:49:49 UTC 2005


I was speaking to someone yeterday who is going to fit some Nissan 350Z
variable cam timing stuff to a Nissan RB30 engine=2E

HKS produced a limited number of what was called V Cam that had the same
function and is aparently very similar to the 350Z stuff=2E

V Cam pics here

http://www=2Esol=2Eco=2Euk/h/hugh/HKS%20vcam1=2Ejpg
http://www=2Esol=2Eco=2Euk/h/hugh/HKS%20vcam2=2Ejpg

Original Message:
-----------------
From: Mike niche at iinet=2Enet=2Eau
Date: Mon, 01 Aug 2005 21:58:47 +0800
To: diy=5Fefi at diy-efi=2Eorg
Subject: [Diy=5Fefi] TurboCad, mech dwgs from ppl on this group =3F


Hi Chaps,

Just about to try out Turbo Cad, and curious if people have any
example drawings of EFI related projects they would be prepared
to let me have a look at or discuss =3F

I used to be an Autocad/Autosketch experimenter some 12 years
back, but Turbo Cad is much cheaper (got a version 7=2E1 for free)
and seems a lot faster=2E=2E=2E

I'm about to do some cad on extrusions, manifold modifications
(from six into one to six into six etc), variable valve timing mod
to an RB30E engine and various other small oddments=2E



Regards from


Mike
Perth, Western Australia
VL Commodore Fuse Rail that wont warp or melt !
Twin Tyres for most sedans
http://niche=2Eiinet=2Enet=2Eau

=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Diy=5Fefi mailing list
Diy=5Fefi at diy-efi=2Eorg
http://lists=2Ediy-efi=2Eorg/mailman/listinfo/diy=5Fefi


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web=2Ecom/ =2E


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list