[Diy_efi] Vortec 4200 Inline 6 ECM - Twin Turbo -

[Brien Tourville]

Hey Ernie~!

http://tinyurl.com/7uje4


I've posted the Twin Turbo Picture there >
Enjoy!


Brien.




Date sent:      	Thu, 18 Aug 2005 17:16:27 -0700
From:           	"Ernest Buckler" <ebuckler at icehouse.net>
Subject:        	Re: [Diy_efi] Vortec 4200 Inline 6 ECM - Twin Turbo -
To:             	<hh7x at verizon.net>,	<diy_efi at diy-efi.org>

Sure am looking for you guys to post some links to good pics of
various setups on this. Ernie B.

----- Original Message ----- 
From: "Brien Tourville" <hh7x at verizon.net>
To: "jb" <jonnbell at gmail.com>
Cc: <diy_efi at diy-efi.org>
Sent: Thursday, August 18, 2005 3:14 AM
Subject: [Diy_efi] Vortec 4200 Inline 6 ECM - Twin Turbo -


> It was a good 'heads up' !
>
> Forget eBay >  go to:
>
> www.car-parts.com and punch in year
> 2005 for the engine ( best ) and take a look.
>
> I had the good fortune yesterday to obtain
> the ONLY photograph from GM taken of
> their Vortec Twin Twin Turbo 4200 engine.
>
> It is a beast of a .jpg > being some 5.4MB
> which I had a copy of reduced to some 2MB.
>
> It isn't the Turbo setup in the Truck, as this
> has the Turbos sporting bellmouth stack styles
> and hugging the block > regardless, it is cool.
>
>
>              Brien.
>         NEW YORK
>   eagle registry #501
> eagle kammback registry
>
>
> Date sent:      Wed, 17 Aug 2005 21:16:49 -0500
> From:           jb <jonnbell at gmail.com>
> Subject:        Re: [Diy_efi] Vortec 4200 Inline 6 ECM - Turbo
> Article - To:             hh7x at verizon.net, diy_efi at diy-efi.org
>
> sorry to have gotten your hopes up so high everyone, but there 
wasnt
> really an article about the car.  it's in the september 05
> (currently on shelves, i would think) but is only mentioned in a
> paragraph and a picture because he  placed 18th in their Pump Gas
> Drags.  apparently, this was the car's first shakedown and he
> averaged 9.612 with a best of three at 9.245 @ 145.86.  wow.  from
> the picture i can see a pretty hefty turbo and what appears to be a
> custom sheetmetal intake with what i also think is a custom fuel
> rail and injector setup.  i havent seen a stock version of the
> engine, so i cant say what else is new. i am hoping that the car
> will raise enough ruckuss to have hot rod do a real article on the
> car.  the section also mentions that he is signed up for their Drag
> Week, which should be quite the separator of street cars from
> so-called street cars.  the gist of it is that they have five 
strips
> taht you have to drive the car to and race in a week. nobody
> following you, a trailer on your car if you want, and race gas if
> you can carry it all with you.  sounds cool.
>
> thanks for all the info on the I6 and id like to keep the 
discussion
> going.  it looksl ike you can have one of these engines for ~$1k.
> anybody know what the ebay versions include?
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.11/74 - Release Date:
> 8/17/2005
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 




-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.11/74 - Release Date:
8/17/2005

             Brien.
         NEW YORK
   eagle registry #501
eagle kammback registry
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi