[Diy_efi] vehicle speed sensor

[loomanb at chartermi.net]

  I have seen them available in Standard Ignition and Borg Warner. We have just changed to a NAPA store and I have not had a call for them yet. It seems like they fit 87-89 GM trucks and I think some Chryslers and Fords also. If that isn't enough info, let me know and I will get you a part number. I will be out of town for the weekend however, so next week will be the earliest.
> 
> From: "Joe Boucher" <boucherj at prodigy.net>
> Date: 2005/08/26 Fri AM 02:35:42 GMT
> To: <diy_efi at diy-efi.org>
> Subject: RE: RE: [Diy_efi] vehicle speed sensor
> 
> Who is the manufacture?
> 
> Thanks,
> 
> Joe
> 
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> Behalf Of loomanb at chartermi.net
> Sent: Thursday, August 25, 2005 8:54 PM
> To: diy_efi at diy-efi.org
> Subject: Re: RE: [Diy_efi] vehicle speed sensor
> 
> 
>   They make some that screw into the tailshaft and then the speedo cable
> threads on to it. We sell them at my autoparts store. I can't think of an
> application off the top of my head, but if your local store can't help you
> out let me know.
> >
> > From: "Joe Boucher" <boucherj at prodigy.net>
> > Date: 2005/08/26 Fri AM 12:44:13 GMT
> > To: <diy_efi at diy-efi.org>
> > Subject: RE: [Diy_efi] vehicle speed sensor
> >
> > If it's a computer controlled carb, the VSS is in the back of the
> > speedometer.  I think.  There is an LED and a sensor for the same wave
> > length as the LED.  A bar attached to the speedometer cable swings the bar
> > between the led and the sensor.
> >
> > Doesn't a company called Arizona and Marine sell the vss sensor which is
> > used with a mechanical speedometer cable?
> >
> > -----Original Message-----
> > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> > Behalf Of Muhamad Adlan Abdullah
> > Sent: Thursday, August 25, 2005 7:17 PM
> > To: diy_efi at diy-efi.org
> > Subject: [Diy_efi] vehicle speed sensor
> >
> >
> > Hi,
> >
> > I am working on  a project on my old craburetted car. I need to get
> > the vss out from it. It doesn't have any vss sensor, just a metal
> > cable to the meter cluster.
> >
> > can anyone point me where to get any speed sensor for this purpose?
> > some kind of an adaptor to the existing cable, that you just plug it
> > in the gearbox, maybe?
> >
> > thanks in advance
> >
> > Adlan
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi