[Diy_efi] Tried to use WinALDL

[Lee M. Lemoine]

One other note, Pin M will be the one your looking for in 8192 baut systems

On 8/25/05, Joe Boucher <boucherj at prodigy.net> wrote:
> I made the circuit on the web page, loaded the software in a 350 mhz lapt=
op
> and tried it out.  Nothing happened.  For the most part.
>=20
> The one problem is I have one of the more obscure ECU's, a 16144288 in a =
'93
> Suburban.  The documentation on the web page show  the data stream coming
> from pin E.  I don't have a pin E.  I found some references to some ECU's
> data stream using pin M.  I have a pin M.  I tried it but nothing happene=
d.
>=20
> If I tried to hook up to a pin and made and broke the connection quickly,
> the data fields started filling up.  So I think the circuit and the softw=
are
> are working, but no data is making it to the laptop.
>=20
> Any ideas where to go next?
>=20
> Thanks for any help.
>=20
> Joe
>=20
>=20
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>=20


--=20
Sincerely,

Lee M. Lemoine
http://www.turbochargedsoul.com/
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi