[Diy_efi] FW: [fangle] Testing an inductance coil.
WSCowell at aol.com
WSCowell
Wed Aug 17 16:27:07 UTC 2005
Joe,
Why not try using a multimeter on the ohms or continuity range to test the
ignition pickup? You seem to be describing a small coil, probably wound
around a ring-shaped core, which fits around an ignition lead. This device will
generate a small voltage in the winding of the coil every time the spark plug
lead passes current (i.e. every time that plug fires).
It will have a low resistance, almost zero typically.
You could also try using an oscilloscope to look at the voltage waveform
developed across the coil. You should get an AC waveform ringing back and forth
a few cycles every time the plug fires.
Good luck!
Will C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050817/56f14137/attachment.html
More information about the Diy_efi
mailing list