[Diy_efi] 90 Reatta Data Gathering

[Scott Pearson]

The Reatta is a GM-30 car, not much in the diy world for scanning. On my 88 
Trofeo, which uses basically the same data stream and ECM, I use a Tech 1 
for scanning. It has a rather short data logging feature, but it gets the 
job done. That, with Tunercat's RT Tuner works rather nicely.

Trying to mail order tune one of these is going to be a nightmare. Your 
friend would be well off to learn to tune this car himself. Has he upgraded 
to a larger MAF?

Scott
88 Trofeo Supercharged
www.theautoshop.net/SuperchargedTrofeo.htm


----- Original Message ----- 
From: "C. J. Frederick" <cfrederick at new.rr.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, August 26, 2005 10:48 AM
Subject: [Diy_efi] 90 Reatta Data Gathering


> Hi All,
>
> I am posting this for a friend.  He has a 90 Reatta and has installed a
> turbo with bigger injectors and some other mods.  It has a digital dash
> and
> that is a problem.  He can only view one variable at a time and only while
> driving.  Is there a software that can be used with a laptop connection to
> gather and store data for analysis?  He has been sending his chip (ECM
> modified with a socket for chip removal) for adjustments but without being
> able to see all the data and tables after a drive, its a crap shoot.  Any
> help would be appreciated.
> Thanks,
> CJ
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>