[Diy_efi] idle numbers '748

Karl Walter krw at efn.org
Sun Feb 6 03:34:28 GMT 2005


Another Idea, has anybody made an idle air control stepper motor controller?
I could switch out the ECU and just run the IAC in and out manually once
things have warmed up and stabalized.

Also,  I posted some desctiption of my machine at the picture link:
www.waltech.org/yg/yg.htm
----- Original Message -----
From: "Bobby Yates Emory" <liberty1 at gmail.com>
To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
Sent: Saturday, February 05, 2005 4:24 PM
Subject: Re: [Diy_efi] idle numbers '748


> Karl,
>
> Hope You'll draw up plans or sketches.  If you were to build another,
> what would you keep the same and what would you change?
>
> If you want to go to dual wheels,  I did something once that worked.
>
> Bobby
>
>
> On Sat, 5 Feb 2005 11:53:29 -0800, Karl Walter <krw at efn.org> wrote:
> > Here's a link to pictures of it.  It's not really a tractor, more of a
> > crane, and a welder.
> >
> > http://www.waltech.org/yg/yg.htm
> >
> > ----- Original Message -----
> > From: "Wallace Daniels" <wally.daniels at ns.sympatico.ca>
> > To: "A list for Do-It-Yourself EFI" <diy_efi at diy-efi.org>
> > Sent: Saturday, February 05, 2005 8:37 AM
> > Subject: Re: [Diy_efi] idle numbers '748
> >
> > > Hi Karl,
> > >
> > >          Can't help you with your question, but I would love to see a
> > > picture of
> > > your retrofit.
> > >
> > >          Good Luck, and I hope you can get things working.
> > >
> > > Wallace
> > >
> > > At 07:39 AM 2/5/05 -0800, you wrote:
> > > >Hello,
> > > >
> > > >Does anybody know the location for the idle speed vs temp in the .bin
> > file
> > > >for a 1227748 ecu from a 88 grand am 4 cyl?  I have the engine in a
> > > >tractor and with the low low first gear, and when the idle is at 800,
I
> > > >can't stop the machine without putting it in neutral.
> > > >
> > > >--Karl
> > > >
> > > >_______________________________________________
> > > >diy_efi mailing list
> > > >diy_efi at diy-efi.org
> > > >http://lists.diy-efi.org/mailman/listinfo/diy_efi
> > >
> > > _______________________________________________
> > > diy_efi mailing list
> > > diy_efi at diy-efi.org
> > > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
> > _______________________________________________
> > diy_efi mailing list
> > diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
>
>
> --
> Toward freedom,
>
> Bobby Yates Emory
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list