[Diy_efi] Re: WB board on ebay

[David Cooley]

Hmm... I built the one with the LCD display and the input to the A/D is
0-2.5V... And the lookup table only uses 0-1V 

> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org 
> [mailto:diy_efi-bounces at diy-efi.org] On Behalf Of Milosz Kardasinski
> Sent: Wednesday, February 09, 2005 4:35 PM
> To: A list for Do-It-Yourself EFI
> Subject: Re: [Diy_efi] Re: WB board on ebay
> 
> On Wed, 9 Feb 2005 15:51:55 -0500, David Cooley 
> <n5xmt at bellsouth.net> wrote:
> > If the board is assembled, then yes, all that is left is the Sensor.
> > And these boards do provide a 0-1V output.
> > 
> 
> Are you sure about that? As far as I know the dweeb-o-meter 
> board is 0-4V not 0-1V _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
> 

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi