[Diy_efi] 7148 baud

[Jim Butterfield]

Roger, I just swapped a 3800SC from a grand prix... grand prixs use analog guages, your using an older motor, so you will need to get the voltage off the alt and also get a beretta sender... about the tach, there should be a tach output on the pcm....
jjim

Kristy <kristy40505 at yahoo.com> wrote:

I am building a 3800 turbo Fiero and wanting to install a digital cluster from a Beretta but can't seem to get the Temp, Tach or Volt meters to work it seems they use the serial data from the Ecm to operate them. The problem is I am using is the 1227148 from the 87 Buick GN with a 160 baud and the Beretta uses a 16198262 which has a 8192 is their a way to trick the cluster into using the 160 baud 

Thank you 

Roger Denney 



---------------------------------
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

		
---------------------------------
Yahoo! Mail
 Stay connected, organized, and protected. Take the tour
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050702/72d15069/attachment.html