[Diy_efi] 555 timer for injector driver

don.broadus at exeloncorp.com don.broadus
Thu Jul 7 17:56:40 UTC 2005


Hi Dan: I did notice the missing clamp diode, I had planned on adding one
myself.
        The circuit will come in handy for pulsing injectors on the car and
also for 
        a flow bench I'm working on. Thanks again for sharing a great
circuit.     




-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
Behalf Of Daniel R. Nicoson
Sent: Thursday, July 07, 2005 12:01 PM
To: diy_efi at diy-efi.org
Subject: RE: [Diy_efi] 555 timer for injector driver


Don,

check with me tomorrow.  I want to check my breadboard to see if I an using
a diode across that TIP-120 on the breadboard.  I've got so many projects
going I just threw that out to help Jeff get going.  I probably need to do a
final quality check...

Dan Nicoson


> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> Behalf Of don.broadus at exeloncorp.com
> Sent: Thursday, July 07, 2005 12:31 PM
> To: diy_efi at diy-efi.org
> Subject: RE: [Diy_efi] 555 timer for injector driver
>
>
> The Signal Generator  circuit is great !  Plan to wire one up. Thanks Dan
> for sending it out.
> Take Care  Don
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> Behalf Of Daniel R. Nicoson
> Sent: Thursday, July 07, 2005 10:03 AM
> To: diy_efi at diy-efi.org
> Subject: RE: [Diy_efi] 555 timer for injector driver
>
>
> Jeff,
>
> I'd skip the solenoid to run your injector.  You're trying to
> control a slow
> device (injector) with possibly an even slower device (solenoid).
>
> Use either a Darlington transistor or a Mosfet as has already been
> suggested.  They are not too expensive from the local Radio
> Shack.  I use a
> good heat sink on the TIP-120 shown in the diagram.  When running at long
> pulse widths, it can build some heat.  (TIP-120 was used simply because it
> was in my parts bin, other Darlington's will work.  You would want to add
> few other things to use the Mosfet properly)
>
> I've attached a .pdf of the signal generator I've developed for
> use with my
> projects.  Use as much or as little of this circuit as you wish.  I'm only
> using a breadboard version at this point. I may make up a PCB later this
> month.
>
> Take care,
>
> Dan Nicoson
>
>
> > -----Original Message-----
> > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
> > Behalf Of jeff matthews
> > Sent: Wednesday, July 06, 2005 9:39 PM
> > To: diy_efi at diy-efi.org
> > Subject: [Diy_efi] 555 timer for injector driver
> >
> >
> > Hi-
> > To keep my ??? simple,  I built a 555 timer to work on a little
> > experiment,
> > I have it energizing the solenoid on a  12v relay, why won't it open and
> > close my injector? (it's just a basic saturated 550cc).  Is there some
> > secret to on making an injector operate?
> >
> > Like I stated,  this is for an experiment, just thought I could handle
> > making an injector fire on the bench...
> >
> > Best regards,
> > JEFF
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >
>
>
> ************************************************************************
> This e-mail and any of its attachments may contain Exelon Corporation
> proprietary information, which is privileged, confidential, or subject
> to copyright belonging to the Exelon Corporation family of Companies.
> This e-mail is intended solely for the use of the individual or entity
> to which it is addressed.  If you are not the intended recipient of this
> e-mail, you are hereby notified that any dissemination, distribution,
> copying, or action taken in relation to the contents of and attachments
> to this e-mail is strictly prohibited and may be unlawful.  If you have
> received this e-mail in error, please notify the sender immediately and
> permanently delete the original and any copy of this e-mail and any
> printout. Thank You.
> ************************************************************************
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi




More information about the Diy_efi mailing list