[Diy_efi] Blue Marble Oil Treatment

[joeld]

One engine was enough pain and $$ thanks. Ended up being rushed and it we 
didn't ahve enough testing time or time to built all of the extra pieces that 
we wanted to make it work properly. Ive got pics of it though.

I also 'happen' to run BM in my personal sled and it is a fine oil in my 
opinion. My motor is about at far as one can go for pump gas at my elevation 
(155 hp on an eddy current out of 700cc) and no problems yet.

Joel


>===== Original Message From "Ernest Buckler" <ebuckler at icehouse.net> =====
>Good story, thanks.  To be fair, you should have built TWO engines and run
>them side by side, their oil in one, different brand in the other one.
>
>Any link to more info on this test engine itself?   An injected supercharged
>two-stroke has some interest for me, regardless of the oil....
>
>Ernie B.
>
>----- Original Message -----
>From: "joeld" <joeld at ualberta.ca>
>To: "Clayton Martiniuk" <wildwood at aptalaska.net>; "A list for Do-It-Yourself
>EFI" <diy_efi at diy-efi.org>
>Sent: Tuesday, July 19, 2005 2:18 PM
>Subject: RE: [Diy_efi] Blue Marble Oil Treatment
>
>
>> They sponsored a University project I ran. We designed built our own
>> billet
>> alum cylinders and heads  for a 2-stroke engine and ran a supercharger on
>> it
>> with our injectors right in the cylinder walls. Anyhow, the oil worked
>> fine
>> for us and that engine went through hell when we were developing it. If
>> you
>> search around you will find the typical snake oil claims and the guy
>> running
>> the show has many a tale to tell if you want to take 45 min to listen to
>> him.
>> Rumors of ties to old Enron people and all sorts of other stuff. Anyhow,
>> it
>> worked for us and it was free. Did it do anything special? Doubt it.
>>
>> Joel Day
>> 4th Yr. B.Sc. Min Eng
>> 2004 C.S.C. Project Coordinator
>> Home: 780-434-9294 Cell: 780-722-5376
>> C.S.C Team Website: www.ualberta.ca/~uacsc
>>
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org
>> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi

Joel Day
4th Yr. B.Sc. Min Eng
2004 C.S.C. Project Coordinator
Home: 780-434-9294 Cell: 780-722-5376
C.S.C Team Website: www.ualberta.ca/~uacsc