[Diy_efi] Speed Sensor

[Mike]

At 10:26 AM 7/29/05, you wrote:
>>From: Joe Boucher <boucherj at prodigy.net>
>>Date: Thu Jul 28 21:04:28 CDT 2005
>>To: diy_efi at diy-efi.org
>>Subject: RE: [Diy_efi] Speed Sensor
>Three's nothing on the sensor other then MADE IN USA...
>Chris in north jer z

You mean made by the company "USA" in taiwan ...

<chuckle>





>>Who is the manufacture of the sensor?
>>
>>-----Original Message-----
>>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>>Behalf Of alladinsaane at verizon.net
>>Sent: Friday, July 22, 2005 8:29 PM
>>To: diy_efi at diy-efi.org
>>Subject: Re: [Diy_efi] Speed Sensor
>>
>>
>>you can get various speed sensors from JTR.com....JAGS THAT RUN.....they
>>have about 5-6 different 1's...I just got 1 from them to put 91 vette speed
>>density tpi on my 76 vette...the 1 i got just goes between the speedo cable
>>and the trans...chris in north jer z
>>>From: Clayton Martiniuk <wildwood at aptalaska.net>
>>>Date: Fri Jul 22 17:43:04 CDT 2005
>>>To: A list for Do-It-Yourself EFI <diy_efi at diy-efi.org>
>>>Subject: [Diy_efi] Speed Sensor
>>
>>>Looking for some help, trying to figure the best way to get a vss signal to
>>my 94 5.7. I have this motor in an?86 chevy truck. The motor came out of an
>>suburban with a 4L80. I've?heard of?a kit that you weld onto your reluctor,
>>not sure if this the best or only way.? thank you
>>>
>>>_______________________________________________
>>>Diy_efi mailing list
>>>Diy_efi at diy-efi.org
>>>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>>
>>_______________________________________________
>>Diy_efi mailing list
>>Diy_efi at diy-efi.org
>>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>>
>>
>>_______________________________________________
>>Diy_efi mailing list
>>Diy_efi at diy-efi.org
>>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi

Regards from


Mike Massen
Perth, Western Australia
VL Commodore Fuse Rail that wont warp or melt !
http://niche.iinet.net.au