[Diy_efi] info

[Ian Molton]

Mike wrote:
> At 08:31 AM 10/29/05, you wrote:
> 
>>I'd remove it from the case,  wash down the PCB and case good with clear clean water,  then blow it with compressed air and let it dry for a few days.  Once I was sure it was complete dry I'd reassemble it and try running it.  What id there to loose? 
> 
> 
> Best solvent to remove other things is Isopropyl alcohol (Isopropanol),
> let dry normally - dont use compressed air, there is potential for localised
> static damage,

IPA may destroy some types of capacitor. be careful.