[Diy_efi] CFI

Sat Sep 17 05:28:39 UTC 2005

I tried to get the thing to move but they do not

Bret Levandowski <skishop69 at yahoo.com> wrote:Very possible. Unfortunately, you need a special tool to command it in and out. It's been a while since I looked at a CF set up, but if you see the IAC pintle end where it contacts the seat inside the manifold/TB (the air passage) you could watch it and have someone put it in gear to see if it changes position. The only other option is to pull it, clean it, extend the pintle all the way by hand and re-install it. See what happens. Sometimes it works, sometimes not.  Ski

steve mac <shaolin116 at yahoo.com> wrote: yeah i know that all to well.  could the iac controllers be the root of my idleing problem?

Bret Levandowski <skishop69 at yahoo.com> wrote: Just a little rib jabbing. Something we started calling it years ago and it stuck. I'm on EBay entirely too much.

steve mac <shaolin116 at yahoo.com> wrote: evil eaby????? whats that about????

Bret Levandowski <skishop69 at yahoo.com> wrote: From what I've been told, and I'm no expert on CFI, is that the system operation is the same as are the connections. I believe you will have to do some wire splicing to get all the connectors to their proper locations switching to TBI. Just change the intake and get a stock 5.7l TB unit and you're in business. Should you decide to stick with the CFI, check Evil Bay. There are always a ton of those things for sale. That was a GM engineering marvel that should have gone straight to ye olde recycling bin.  Ski

steve mac <shaolin116 at yahoo.com> wrote: How hard would it be to hook up a throttle body with dual injectors? Would i be able to just take the plugs that i have now and hook everything up or am i just dreaming?  

Djfreggens at aol.com wrote: cross fire looks kewl but its like trying to run a marathon with a straw in your mouth(read no power or Tq. if you had a 10,000lb pickup truck a TPI manifold would be the  ticket(2200-4500rpm. if you want averaged over the curve power(2600-6200) try looking at a stealth ram. if you want low end heavy power look at a superram(2400-5800). if you want high end power(3400-7400) look into a tpis miniram ( junk IMO) if you wanna run vortec heads and use a factory manifold and have good overall power(2100-5900) check into the marine vortec intakes. these rpm figures are based on a typicaly 350ci or 5.7L engine. and that's unported as well. with port work the stealth ram will goto 7000rpm on a big inch small block.
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort. _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort. _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort. _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

---------------------------------
Yahoo! for Good
Click here to donate to the Hurricane Katrina relief effort. _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com _______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20050916/fa209704/attachment.html 