[Diy_efi] EFI lift pumps to swirl pot?

[cobraman at insightbb.com]

That is a lot of pump - it will heat the fuel and really keep it moving. TomS


> 
> 
>   15/02/2006 16:01
> 
> I wonder if someone could answer a slightly OT question for me please? I
> am building my own fuel system for a circa 700 BHP Nissan Skyline RB26
> turbo engine. I will make the swirl pot at cetera in house, to utilize
> my newly acquired TIG. The engines fuel rail will be fed from the swirl
> pot with two Bosch 044 pumps in parallel. It's the lift pump, from the
> stock fuel tank to the swirl pot I need advice on. Will the uprated
> (Walbro 255 l/hour) high pressure pump currently in the tank be ok,
> given that it now has to only move fuel at next to no pressure, into the
> swirl pot and back via a minor restriction keeping about 2 PSI in the
> pot, and back to the main stock tank? If not, can anyone recommend a
> suitable in tank lift pump please? Thanks.
> 
> -- 
>        Best Regards,
>                    Chris Wilson.
> mailto: chris at chriswilson.tv
> 
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi