[Diy_efi] Re:Re: Fuel Fittings

[Jay Rabe]

A decent place for an fittings etc is http://www.anplumbing.com
Enter the shop and click on fuel injection under kits.    Its a filter for
$70 and it is rated @ 4000 gallons per hour.


On 2/15/06, cobraman at insightbb.com <cobraman at insightbb.com> wrote:
>
>  I have had good luck with Goodyear 300 psi Push Lock hose, AN
> fittings, and 3/8 steel double flaired pre-made tubing. It seals with the AN
> fittings fine. I start at both ends and seal the center joint with a brass
> ferrule union. I haven't found a source for a big EFI fuel filter with AN
> fittings.  I hate hose clamps.  Anyone have any ideas?  TomS
>
> I even used SS cover held in place by pieces of shrink tubing - makes it
> look like braided stainless - but usable.
>
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20060221/264fc563/attachment.html