[Diy_efi] 1.3l TBI project
Bill Shaw
b.shaw
Thu Jan 26 00:00:47 UTC 2006
What's the throttle body look like on the 1.3 metro? What's the diameter? I
was thinking about using 8 small tb's for my 928 if I could find something
the right size.
Bill
'84 928s 5 sp. Vortech/749
> From: jb <jonnbell at gmail.com>
> Reply-To: diy_efi at diy-efi.org
> Date: Wed, 25 Jan 2006 16:25:41 -0600
> To: diy_efi at diy-efi.org
> Subject: Re: [Diy_efi] 1.3l TBI project
>
> cant help with your question, but i can get most anything youd need
> for the 1.3L from our pile of metros. efi, tb, whatever. let me know
> if you need any more parts
>
> On 1/25/06, John EFI Project <efi.project at gmail.com> wrote:
>> I have been reviewing the info available in this group making or adapting an
>> TBI system from a GM 1.8l.
>> I was wondering how much of the programming I would or might have to
>> change(if any) to make this system work on a 1.3l motor. I have the
>> computer, TBI, wiring and all the sensors from a 1985 chevy cavalier with a
>> 4 speed. This project is going into a 1987 suzuki samurai.
>>
>> I also have an old laptop (p-133) and the ALDL adapter and programming to
>> read the computer, but I am not sure how that will help me.
>>
>> I am a newby at this and trying to not drown in all the available info.
>>
>> Any help would be GREATLY appreciated.
>>
>> John
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org
>> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>>
>>
>>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list