[Diy_efi] RE: Nissan KA24E ECU and CAS

[The AirHawk]

> Not to state the obvious, but if its a cam sensor, won't it be turning
> at half the engine speed?  Meaning, its good to 7200RPM at the
> crank?  Or, is this an OHC motor with cams that are geared 1:1
> to the crank?  I'm an SBC/BBC guy, so my knowledge of ANYTHING
> with overhead cams is just about nil.
> 
> -Scott

Cams still rotate at .5 of Crankshaft RPM. Give or take.    ;^D

-Scott C.