[Diy_efi] dis 90 cutlass v6 3.1

[Tom Visel]

The crank sensor reads a wheel which is built into the crankshaft on 
these engines.  That might be a make-or-break consideration when 
deciding whether or not to apply this system to another engine.  If you 
get a chance, look inside the oil pan on a 3.1 for the extra flywheel 
built into the middle of the crank.  I'm sure a work-around could be 
done, but how hard do you want to work?
TomV

ltallant at alltel.net wrote:

>I'm new to the list.  I am also new to fuel injection and am beginning research now for a future project.  I am curious whether this is a good system to retrofit onto an older inline 6 of similar displacement.  These GM 3.1's are plentiful in the u-pull yards in my area.  Also the weatherproof ecm looks like a plus, and the DIS is great.
>
>I have a '90 Cutlass Supreme with this system and it has 198k with no major problems.
>
>Thanks,
>Larry Tallant
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>
>  
>