[Diy_efi] Injectors Not Firing...

[Clair Davis]

Update...

OK, the multimeter says I've got 12V at BOTH pins on the injector...  Me
thinks that's not so good, and probably not what VATS does.

I also pulled the PROM out, mostly to verify to myself that I DID in fact
have it in the box, and judging by the scribbles on the chip, the guy who
programmed it probably DID do the right thing(s) with it.  I'll shoot him an
email and see what he can dig up on the project.

In the mean time, I've got to do some digging myself and see what I've done
when hooking the system up.  There's NOT a separate wire for the injector
power, so I'm thinking it is worked in to some other junction in the system.
Time to go take some notes.

Clair


----- Original Message ----- 
From: "Marty Schmid" <marty67357 at yahoo.com>
To: "Charles Woock" <atomic at extendwireless.net>; <diy_efi at diy-efi.org>
Sent: Sunday, October 08, 2006 11:38 PM
Subject: Re: [Diy_efi] Injectors Not Firing...


> what prom are you using if it is camaro, moat likely vats has dis-abled
the injectors. you need to have a scan tool connected and look at the vats,
is it enabled or disabled
>
> ---------------------------------
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great
rates starting at 1?/min.
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page:  http://www.diy-efi.org/diy_efi
>