[Diy_efi] Circuit boards from China fab have arrived - very nice quality

Steven P. Donegan steve
Mon Sep 18 12:35:34 UTC 2006


Sorry, FedEx cost was ~20$ I believe.

On Mon, 2006-09-18 at 14:25 +0800, Mike wrote:
> Sorry I must have missed the thread - is this for an EFI controller ?
> 
> Curious how much the Fed Ex was from CHina to US ?
> 
> Rgds
> 
> Mike
> 
> 
> At 04:21 AM 9/18/06, you wrote:
> >The boards arrived after 2 days - FedEx does darn good on international
> >orders.
> >
> >I have populated the first board with the same components as my pure
> >breadboard setup contained. I expect by tomorrow PM I'll have seen if it
> >does the MAF interceptor/translator job correctly. In addition the board
> >(1.25 inches X 3 inches) has support for 5 analog inputs such as IAT,
> >TPS, CT, O2 sensors etc. Output can drive an LCD panel and an RS-232
> >port. Not bad for a board with 8 active components on it :-) All
> >'unused' I/O pins are present on headers - so as the software grows the
> >hardware will be ready. My only ooops on the board was placing the
> >crystal pins at .3 inches instead of .2 inches - schematic has been
> >modified for the next run.
> >
> >At some point I will offer these for sale if there are any interested
> >parties out there.
> >-- 
> >"Each new law makes only a single guarantee. It will create new
> >criminals."-- John Tandervold
> >
> >_______________________________________________
> >Diy_efi mailing list
> >Diy_efi at diy-efi.org
> >Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> >Main WWW page:  http://www.diy-efi.org/diy_efi
> 
> 
> 
> Regards from
> 
> 
> Mike Massen
> Network Power Systems
> Lab 08 9444 8961
> Mb 0438 048961
> Perth, Western Australia
> * VL/VK Commodore Fuse Rail that wont warp or melt !
> * RB30 Skyline/Nissan/VL Milspec now in economy trials
> * Twin tyres for most sedans, trikes and motorcycle sidecars
> * Industrial grade PolyVinyliDeneChloride (PVDC Copolymer) in bulk, the best
>   oxygen and water protective barrier you can find for circuit boards.
> Web site under construction   http://niche.iinet.net.au
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
> Main WWW page:  http://www.diy-efi.org/diy_efi
-- 
"Each new law makes only a single guarantee. It will create new
criminals."-- John Tandervold





More information about the Diy_efi mailing list