[Diy_efi] 60-2 Toothwheel - Kalman Filter or ( EKF ) usage

[Tomas Sokorai]

On 4/5/07, Bruce A Bowling <bbowling at earthlink.net> wrote:
> The one thing I have dropped a few times here but no one has questioned is why is there more error at low RPMs?

Very non-linear deceleration/acceleration from the compression and
combustion events? And the rotational inertia (flywheel/rotational
assy.) is too low at these RPMs to dampen these accel/decel pulses ?

-- 
Tomas J. Sokorai Sch.