[Diy_efi] Another dyno-room story, FMC/Bradley
Mike Yates
tmc_mike_yates
Wed Sep 12 21:56:55 UTC 2007
YES...not sure if it is stateside yet though...one of my employees
wants one bad....i can't figure out why though.
Mike
On Wed, 12 Sep 2007 16:55:12 -0500, you wrote:
>This is great stuff they get better and better. Do they now have a Diesel Bike ?
>
>-----Original Message-----
>From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>Behalf Of Ernest Buckler
>Sent: Wednesday, September 12, 2007 4:25 PM
>To: diy_efi at diy-efi.org
>Subject: [Diy_efi] Another dyno-room story, FMC/Bradley
>
>
>I heard this story when I worked at FMC in San Jose on the Bradley Fighting Vehicle prototype program:
>
>There was a requirement for this 25 ton fast (55mph) armored vehicle to make water crossings deeper than hull depth, so one thought was to make the engine capable of runnig underwater. Snorkel was the obvious solution but some bright fellows decided that running the 500 hp compound-turbo-supercharged Cummins V-12 diesel with decomposed H202 (high-purity hydrogen peroxide) would provide adequate oxidizer if it were sprayed through a catalyst consisting of a silver screen in the intake plumbing. (This is how the one-man ultra-light helos work) When it exploded in the all-steel-walled dyno cell (fortunately a bldg set up for just this purpose off by itself), all four walls were completely flattened, and the Cummins block was fractured totally in half. Really wish I had been there (having recently come from Edwards AFB Rocket Test Base, thus was accustomed to big booms and exploding test cells, heh. Flourine and Boron makes a REAL big bang, for one example.). In the end they
>settled on canvas side panels rigged above the hull to give minimal freeboard; with careful weight management, the Bradley FV would pass the water crossing test - tho one test driver proved that any kind of rough water was lethal, by dying in a pond test gone bad on FMC property. And of course the canvas sides were rigged outside, totally vulnerable to shrapnel and small-arms fire. Might as well mention too that the other smart move made in that project was to delete the gasoline-fueled dirt bike that initially was standard equipment inside the Cavalry Recon version - somebody finally figured out that a 4 gal. gas tank was nothing more than an internal fire-bomb, should they take a penetrating hit. There was some minimal effort to come up with a diesel-powered replacement for the bike, but the diesel KX650 did not exist at the time.
>
>Ernest B.
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page: http://www.diy-efi.org/diy_efi
>
>-----------------------------------------
>**************************************************
>This e-mail and any of its attachments may contain Exelon
>Corporation proprietary information, which is privileged,
>confidential, or subject to copyright belonging to the Exelon
>Corporation family of Companies.
>This e-mail is intended solely for the use of the individual or
>entity to which it is addressed. If you are not the intended
>recipient of this e-mail, you are hereby notified that any
>dissemination, distribution, copying, or action taken in relation
>to the contents of and attachments to this e-mail is strictly
>prohibited and may be unlawful. If you have received this e-mail
>in error, please notify the sender immediately and permanently
>delete the original and any copy of this e-mail and any printout.
>Thank You.
>**************************************************
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>Subscribe: http://lists.diy-efi.org/mailman/listinfo/diy_efi
>Main WWW page: http://www.diy-efi.org/diy_efi
More information about the Diy_efi
mailing list