[Diy_efi] EEC-IV in an MGB

[Frank McCracken]

Thanks Jim. Very cool project.
It is a an 8n, must be 194'8' and later. 9n, 193'9' to '41, 2n 194'2 to
1947.
Maybe I'll do a similar project when my 1940 9n engine wears out. It's still
got oil pressure........



> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
> On Behalf Of don.broadus at exeloncorp.com
> Sent: Thursday, September 13, 2007 11:12 AM
> To: diy_efi at diy-efi.org
> Subject: RE: [Diy_efi] EEC-IV in an MGB
>
> Hi Frank; he is a link that  Mike V. was kind enough to provide
>
> http://www.enzoco.com/mike/8n/
>
 Jim in Ohio
>