[Diy_efi] Diy_efi Digest, Vol 6, Issue 6

[Paul Donovan]

     Matco Tools has a set of Crimps with inter changeable jaws that I use
on weather pack terminals all the time.  The set was less than $250.00 ans
covers everything I can throw at it, 10 gauge and smaller, all the way down
to 24 gauge!  Weather pack terminals look just like the terminals you
showed!  Both sizes are on the same die (Jaw!) and  they make working with
these tiny wires much more satisfying!

On Thu, Feb 23, 2012 at 10:00 AM, <diy_efi-request at diy-efi.org> wrote:

> Send Diy_efi mailing list submissions to
>        diy_efi at diy-efi.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.diy-efi.org/mailman/listinfo/diy_efi
> or, via email, send a message with subject or body 'help' to
>        diy_efi-request at diy-efi.org
>
> You can reach the person managing the list at
>        diy_efi-owner at diy-efi.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Diy_efi digest..."
>
>
> Today's Topics:
>
>   1. F CRIMP FOR OPEN BARREL TERMINALS (Aaron)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 22 Feb 2012 21:20:50 -0500
> From: "Aaron" <aaron at creativeoverdrive.com>
> Subject: [Diy_efi] F CRIMP FOR OPEN BARREL TERMINALS
> To: <diy_efi at diy-efi.org>
> Message-ID: <004b01ccf1d1$c38e3f00$4aaabd00$@com>
> Content-Type: text/plain;       charset="us-ascii"
>
> I've always just crimped twice.
> Once on the terminal, once on the insulation.
>
> Something like this ...
> http://www.newark.com/jsp/search/productdetail.jsp?SKU=85C2464
> or this
> http://www.tessco.com/products/displayProductInfo.do?sku=52045&eventPage=1
> or this
> http://www.summitracing.com/parts/CEI-103021/
>
> And I didn't know this stuff.
> http://tooling.te.com/pdf/us_crimpposter.pdf
>
>
> -----Original Message-----
> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org] On
> Behalf Of Hugh Keir
> Sent: Wednesday, February 22, 2012 3:27 PM
> To: diy_efi at diy-efi.org
> Subject: [Diy_efi] (no subject)
>
> Hello Guy's,
>
> I am looking for a low cost crimp tool for prototyping for the AMP
> 3-1447221-3 Superseal crimp connector attached.
>
>
> http://www.onlinecomponents.com/te-connectivity-amp-brand_3-1447221-3.html?p
> =10332614.
>
> The superseal connector is commonly used on the likes of Motec ECU
> connectors.
>
> Ideally the crimp tool would crimp the wire and the sheath in one action.
>
>
> Thanks
>
> Hugh
>
>
>
> ------------------------------
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>
> End of Diy_efi Digest, Vol 6, Issue 6
> *************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20120223/f73c921b/attachment.html