[Diy_efi] Microcontroller based Auto Related Projects

Mike niche
Fri Nov 16 01:00:45 UTC 2012


Its most efficient to ask the person that made the statement,
so you then dont bring others in and potentially waste time...
not muddying the waters by asking someone else, by all means
ask here but best only if you dont get a good answer from the source etc
Dont know what you mean by '...acting on others...' I dont know the
maker of that system or anyone associated with it,  explain please ?

This is an email list, people only answer if they want to, they dont have to,
You didnt say whether you were buying or building yourself, my level of
efficiency is to find out first oneself from the best place - which is the source.
Not to look for mailing lists, not introduce yourself and expect opinions,
we are all about innovation in our own work primarily and to help builders etc
You are not paying for this, It would be nice if some who took the easy option
paid for my time, but then what is free opinion/advice worth.

Will you now build or stay on the list as a member to help others and actually
be like others and have a real name ?

Mike


At 08:52 AM 16/11/2012, you wrote:

>No not buying. Got stuck at that, thought I'd ask. What is with some acting on others behalf. Thought that's why this forum is here. :-)
>
>- Android 2.3.4
>On Nov 16, 2012 12:30 PM, "Mike" <<mailto:niche at iinet.net.au>niche at iinet.net.au> wrote:
>Thanks for link 'funny name' xyz#$&^%#
>
>It says 'primary' this is before any correction factors added for eng temp etc
>if you are buying on he will help, if not just
>looking for theory or want to build your own there are lots of sites
>and other people on this email list are also busy, so best do a lot
>of reading and speak/email to the seller or just buyu his,
>cheers
>mike
>
>At 08:13 AM 16/11/2012, you wrote:
>
>>Rending, after truncating. Message exceeded 40kb.
>>
>>On Nov 16, 2012 12:08 PM, "xyz _" <<mailto:xyzqhtc at gmail.com>xyzqhtc at gmail.com> wrote:
>>>
>>> Here's the link:
>>>
>>> <http://www.sdsefi.com/em2def.htm#EM-2D>www.sdsefi.com/em2def.htm#EM-2D
>>>
>>> Check under 'Theory of Operation'.
>>>
>>> - Android 2.3.4
>>>
>>> On Nov 16, 2012 11:42 AM, "Mike" <<mailto:niche at iinet.net.au>niche at iinet.net.au> wrote:
>>>>
>>>> Hi,
>>>> Manifold pressure should be processed into a value and
>>>> used to look up a table of values for that engine and be recalibrated
>>>> should intake, timing etc change. Mass air flow gets around most
>>>> of that. I'd go back to the source of that statement below,
>>>> regards
>>>> mike
>>>>
>>>>
>>>> At 07:26 AM 16/11/2012, you wrote:
>>>>
>>>>> I'd been doing some reading and searching. Came across a website that mentions "manifold pressure value is multiplied by the rpm value to determine the primary pulse width (of injector). 
>>>>>
>>>>> 1. Can someone please elaborate on this. I know what MP and rpm are but how exactly is this done?
>>>>>
>>>>> 2. Is this a good method and/or are there any other methods available?
>>>>>
>>>>> Thanks. 
>>
>>- Android 2.3.4
>>_______________________________________________
>>Diy_efi mailing list
>><mailto:Diy_efi at diy-efi.org>Diy_efi at diy-efi.org
>>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>_______________________________________________
>Diy_efi mailing list
><mailto:Diy_efi at diy-efi.org>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://lists.diy-efi.org/mailman/listinfo/diy_efi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/diy_efi/attachments/20121116/5e65a982/attachment-0001.html 



More information about the Diy_efi mailing list