1987 5.0L TPI / T5 BIN File

[Terry/Carol Kelley]

Is the T5 the 4+3? Sorry, I don't know the F/Y trannies.

Yes, with a burner you can read the eprom and save it as a file. You will need to make an adapter to go from the mem-cal pins to the eprom pins or copy Dave Cooley's converter.

Terry Kelley 
    -----Original Message-----
    From: Bruce & Lisa Wilcox <wilcoxbl at gte.net>
    To: GMECM <gmecm at efi332.eng.ohio-state.edu>
    Date: Wednesday, April 07, 1999 9:02 PM
    Subject: 1987 5.0L TPI / T5 BIN File
    
    
    Hi,
     
    Does anyone have a 1987 5.0L TPI / T5 BIN file?? The car is a 1987 IROC-Z with 16" wheels and a 3.08:1 limited slip rear end.
     
    The ECM is a 1227165 unit and the desired EPROM Codes (only 1 is required) are 1135ACYC (CA) or 1135ACXY (FED).
     
    What low cost burner is recommended??? Can I pull the EPROM out of my car, read the data into the burner, and make the BIN file??
     
    Thanks and Best Regards,
     
    Bruce Wilcox
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/19990407/56d992a3/attachment.html>