Conversion suggestions...

[Rich Vandervoort]

Check out the slant 6 intnet club for info on /6 intakes. 

http://www.tailfins.com/slant6/cotw/122997cotw.html

Also Ford, BMW and Toyota have produced a PFI inline 6s.

Date: Mon, 12 Apr 1999 18:54:14 -0400
             From: Padgett 0sirius <padgett at gdi.net>
             Subject: Re: Conversion suggestions...

             >> He has a 1980 Dodge Van with a 225 slant 6.  It has a 
Holley 1bbl carb and
             >> runs like crap.
             >> He wants to go with EFI, but doesn't want to go Port 
fuel injection unless
             >> there was a manifold/fuel rail made for this engine 
from the factory
             >> (afraid to try and cut it up!).

             There was a factory 4bbl manifold (AFB) for the slant-6 
back in the 1960-61
             timeframe. The runners were a bit better design than the 
1 and 2 bbl
             versions. Dunno how hard one would be to find but would 
probably be your
             best place to start.
                     A. Padgett Peterson, P.E. Cybernetic 
Psychophysicist
              Anti-Virus, Cryptographics, & Antique Radio Researcher
             http://www.freivald.org/~padgett/index.html
              mailto:padgett at gdi.net     PGP 5.5 Key on request



_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com