Lower ball joints

[Todd Israels]

At 08:58 AM 8/4/99 -0700, you wrote:
>
>> yes, its an opportunity to use your pneumatic drill and other large "Tim
>> Allen" tools Haw Haw Haw :)
>
>Ok, now we're on the same page!
>
>Looks like there is a small weld and they are pressed in. I'll check with
>the machine shop.
>
>The lower control arms are still available from GM. Actually, a lot of Fiero
>parts are.
>
>Terry
>
>
>
	I can look up details if needed but one of the front control arms was
changed to provide better alignment may be worth replacing.  The Hayns
manual states to drill out and the rivets and use bolts supplied with new
ball joint.