Twin turbine TBI pump (was Suction through a unpowered Tank Pump.)

[rr]

Clive Apps Techno-Logicals 416 510 0020 wrote:
> 
> >
> >
> > >
> > >The TBI pump, on the other hand is a twin-turbine design. It's
> > >also a lower pressure pump. This design can most likely be drawn
> > >through...
> > >
> > >hth
> > >
> > >BobR.
> > >
> > Hi Bob--
> >
> > Got any flow/pressure data for this twin turbine TBI pump--or a list of
> > applications??
> 
> same pump from 4.3 up to 454 TBI
> output 10-13 PSI
> flow maxes out at about 400-450 Hp
> 
> Clive
> 

Thanks for the help, GM doesn't put this kind of info
in their shop manuals anymore. (I wish they did!)

> >
> > (Sounds to me like it might not be a bad primary pump for a system using an
> > in-line high pressure pump, of either the electrical or mechanical drive
> > flavor.)
> >

Yes, Ford did this on a bunch of trucks, low pressure in tank, some
kind of vapour separator (I think), then a high pressure in line
in the frame rail located below the drivers feet.

> > Regards,  Greg

BobR.

--