Chomping at the bits....egr disable

[Carl Summers]

Hi Shannen,
        Turn off the egr function at 1b3 and the you will never have to 
worry about the other bpw...to me its the only way to do it when you have 
no egr.......hth's
-Carl Summers

mailto:intech at writeme.com
Click on the above link to respond privately.

-----Original Message-----
From:	Shannen Durphey [SMTP:shannen at grolen.com]
Sent:	Friday, August 13, 1999 9:29 PM
To:	gmecm at efi332.eng.ohio-state.edu
Subject:	Re: Chomping at the bits....egr disable

Carl Summers wrote:
>
> mailto:intech at writeme.com
> Click on the above link to respond privatel
> From:   Carl Summers [SMTP:intech at writeme.com]
> Sent:   Friday, August 13, 1999 12:23 PM
> To:     'gmecm at efi332.eng.ohio-state.edu'
> Subject:        RE: Chomping at the bits....egr disable
>
> Hi Shannen,
>       For some reason my memory tells me that the temp enable is in F and
> the enable is actually inverted.....like 00=255 F and ff=0 F.....and I
> think I had problems when I set it to 00 so I ended up using 11(hex) w  
hich
> should be 234 F.....all I know is I tried it at FE and EGR still
> worked...thought I had the wrong address, tried inverting it and it
> worked...hth's
> -Carl Summers
> [Carl Summers]  er,,,,I mean the egr stopped working
Gotcha.  I'm not worried about EGR, it's not installed.  There's a
note in the ASDZ hac file which says during egr the ecm uses a
different injector base pulse for calculations.  I'm trying to
eliminat thet.
Shannen