EPROM Removal

[Ross Myers]

>It really wasnt all that hard, I didnt destroy the eprom, and it read just
>fine.  But I might have trouble getting it back together. I went through
>the archives for both gmecm and diy_efi, and found the connector you're
>talking about, but the solution was not very good in my opinion.  There
>would be no way for me to erase the eprom because mine must be closed to
>activate it.
>
>I will probably just fix my memcal and install a zif socket on it.
>
>-Eric


What size EPROM was it?, I've got a Memcal that I cut the chip out (after
reading it with an adaptor), once cut out you can clean up the sockets quite
nicely. Then install a 28F256/512/010 Flash ROM. Then whenever you need to
re-program just use the adaptor, no U.V light hassles etc.

Ross Myers