Interesting '89 Calibrator...

[Knowlden and or Eller]

'89 vette has the same calibrator.

Bob

-----Original Message-----
From: owner-gmecm at esl.eng.ohio-state.edu
[mailto:owner-gmecm at esl.eng.ohio-state.edu]On Behalf Of CSH-HQ
Sent: Wednesday, August 25, 1999 9:49 PM
To: gmecm at efi332.eng.ohio-state.edu
Subject: Re: Interesting '89 Calibrator...


That's a new one on me
Bruce


>A couple of months back I bought a 165 ECM out of an junked '89 Camaro.
>Last weekend I finally had a chance to test if it was a good working box.
>After removing the calibrator I took the blue cover off and saw something
>that puzzles me. the 16 pin chip of the two small chips has had the #2 and
>#15 leads cut. There is also a 10k resistor soldered across the #2 and #3
>contacts in the calibrator socket of the same chip. If this is the netres
>chip for limp home what would this modification accomplish?
>
>Baffled Newbie
>Mike
>