Interesting '89 Calibrator...

[Knowlden and or Eller]

Mike, my response was poorly worded. What I was trying to relate was that
the '89 vetts calibrator (APYP)has the the resistor and same pins cut.

Bob

-----Original Message-----
From: owner-gmecm at esl.eng.ohio-state.edu
[mailto:owner-gmecm at esl.eng.ohio-state.edu]On Behalf Of Mike Frels
Sent: Thursday, August 26, 1999 12:19 PM
To: gmecm at efi332.eng.ohio-state.edu
Subject: RE: Interesting '89 Calibrator...


At 11:07 AM 8/26/1999 -0400, you wrote:
>'89 vette has the same calibrator.

The calibrator is an APYM3493. Are you saying that this is possibly a vette
p/n?

> >A couple of months back I bought a 165 ECM out of an junked '89 Camaro.
> >Last weekend I finally had a chance to test if it was a good working box.
> >After removing the calibrator I took the blue cover off and saw something
> >that puzzles me. the 16 pin chip of the two small chips has had the #2
and
> >#15 leads cut. There is also a 10k resistor soldered across the #2 and #3
> >contacts in the calibrator socket of the same chip. If this is the netres
> >chip for limp home what would this modification accomplish?


Mike Frels
----------------
'86 LB9 MK6 J65 G80 G92 Z28 - White/Grey w/black GTA wheels
D9BND(Texas Animal Friendly Plates)
wk: 281-285-4117
hm: 281-343-0122