Simple SyTy Question

[Barry Tisdale]

Resistance between A&B determines the MODE, not the baud rate; its 8192
always.  No resistor there = NORMAL mode, which is what you want for normal
serial data reading 

Serial data on M only; E is N/C.

Barry - Sy#26

At 07:54 AM 12/09/1999 -0600, you wrote:
>Does the SyTy ALDL datastream default to 8192 baud, or does it need the 10k
>resistor between terminals A&B?
>
>Also, which ALDL pin does the serial data appear on - M, E, or both?
>
>Thanks!
>
>-Andrew