Simple SyTy Question

[Andrew K. Mattei]

>Resistance between A&B determines the MODE, not the baud rate; its 8192
>always.  No resistor there = NORMAL mode, which is what you want for normal
>serial data reading
>
>Serial data on M only; E is N/C.


Thanks, Barry (and Bruce) for your replies! It's my understanding that some
cars need to be in certain modes in order to enable 8192 baud (otherwise
they default to 160 baud PWM on the wire). I'm clueless on SyTy's, so that's
why I asked the question about the resistor - I didn't know if it was one of
those or not. :)

-Andrew