off subject

[Don.F.Broadus at ucm.com]

Is this the 2 BBL. TBI pro jection ?  GM TBI injectors are around 1.2 ohms
Holley should be close to this.  If the port injectors you are going to use
are around  12- 16 ohms  drive 4 injectors from one output and 4 injectors
from the  other output. GM does the a similar  thing with a  165 ECM on the
86 Camaro TPI. The injectors are  batch fired ( all 8 injectors connected in
parallel) The same ECM 165 is used on S-10 4 cyl trucks with a 1 BBL TBI .
The 165 ECM has only 1 injector driver and can sink current into as low as
1.2 ohms. So the ECM sees a 1.2 ohm load with 8  16 ohm injectors  in
parallel or a single 1.2 ohm injector.
 
Don    

> -----Original Message-----
> From:	mswayze at truswood.com [SMTP:mswayze at truswood.com]
> Sent:	Thursday, December 16, 1999 12:39 PM
> To:	GMECM_DIY_EFI
> Subject:	off subject
> 
> there is a Holley Pro jection computer
> on E-bay. I wonder if it would fire 
> eight injectors?
> byE
> Mike S << File: Card for Mikeswayze >>