bin files for Camaro

[Bruce Plecan]

-----Original Message-----
From: Shannen Durphey <shannen at grolen.com>
To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
Date: Sunday, February 21, 1999 10:13 AM
Subject: Re: bin files for Camaro

Well, it gets easy then, since I ain't got any of those bins
Bruce


>Hi, Bruce.  Sounds to me like he wants a different calibration for his
>ecm.
>The following calibration codes appear to be correct.
>BAWX/6865
>BMCD/9076
>Shannen
>
>Bruce Plecan wrote:
>>
>> -----Original Message-----
>> From: Mike Pilkenton <mpilkent at ptw.com>
>> To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>> Date: Sunday, February 21, 1999 12:07 AM
>> Subject: Re: bin files for Camaro
>>
>> BCC is Broadcast Code the ARPL is the BCC, are you asking for a bin file
for
>> this
>> BCC?.
>> Is this ecm the one that came with the eng/trans you've got?.
>> Bruce
>>
>> >Bruce, I'm not too clear on what you are asking?  The ecm is a 730
version
>> >and the numbers on the aluminum box are:
>> >
>> >    SERV. NO. 0122730        ARPL
>> >    866631 M220158316
>> >
>> >After taking the memcal cover off the number (bar code) on the circuit
card
>> >is 973159101552055.  I assume this is just a serial number.  The
>> aftermarket
>> >memcal
>> >socket has a small circuit card with SMT components on it which takes up
>> >about half the socket.  The other half has what I assume is the original
>> >memcal which has a sticker on it:  DELCO ARPL 5180.  The aftermarket
chip
>> is
>> >installed with a right angle socket adapter that plugs into the main
board,
>> >houses the new chip, and retains the stock memcal/circuit card unit.  I
>> >don't have any specs on this chip but I will try to get them from the
>> >previous owner.  As far as auto versus manual tranny I guess I could
wire
>> >the P/N switch but I'm not sure the box I have from the original car has
>> >that circuit installed since it came out of 5 speed.  What's a BCC?
>> >
>> >Mike
>> >
>> >
>> >-----Original Message-----
>> >From: Bruce Plecan <nacelp at bright.net>
>> >To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>> >Date: Saturday, February 20, 1999 8:56 PM
>> >Subject: Re: bin files for Camaro
>> >
>> >
>> >>
>> >>-----Original Message-----
>> >>From: Mike Pilkenton <mpilkent at ptw.com>
>> >>To: gmecm at efi332.eng.ohio-state.edu <gmecm at efi332.eng.ohio-state.edu>
>> >>Date: Saturday, February 20, 1999 11:31 PM
>> >>Subject: bin files for Camaro
>> >>
>> >>What BCC code?.
>> >>What vin#.
>> >>Does it have to be 92 for sure?.
>> >>What ecm?.
>> >>Can't you run an auto with the P/N switch lead grounded?.
>> >>While I got a couple bins, I don't have the cross referencing gm does,
so
>> I
>> >>can't
>> >>help without you or anyone else knowing what you want.
>> >>I mean I'm all for studing engine management, but ya gotta know exactly
>> >what
>> >>ya
>> >>want.
>> >>I hope that makes sense,
>> >>Bruce
>> >>
>> >>
>> >>>Does anyone have the bin file for the 92 Camaro 3.1L V6 5 speed
tranny?
>> >>>
>> >>>Mike Pilkenton
>> >>>
>> >>>
>> >>>
>> >>
>> >
>