Turbo V8

[Brett Downs]

hey john my name is brett I have an 86 trans am project car that is not
running and i wanted to swap in a more powerful motor and the ta is tpi.  I
wanted to swap in a 350 and put in twin turbos but i dont know if i should
just swap in a grand national drive train and ecm and be done with it??  was
the performance of the  350 with twin turbos excellent or was it not as good
as you thought it would be??  What kind of problems did you run into and
what kinds of electronics did you use to control the setup?? and do you have
any other sites i could visit that would give me a good idea of what this
setup is like?? thanx john.

Brett Downs
brettd at broadcast.net

----- Original Message -----
From: Jon Fedock <galadar at worldnet.att.net>
To: <gmecm at diy-efi.org>
Sent: Sunday, August 26, 2001 4:57 PM
Subject: Re: Turbo V8


> I might can help with this project if its a third gen. What
year/motor/etc?
> Jon
> www.geocities.com/jonfedock
>
>
>
>
> ----- Original Message -----
> From: Joe Piche <pichej at telusplanet.net>
> To: <gmecm at lists.diy-efi.org>
> Sent: Sunday, August 26, 2001 3:08 PM
> Subject: Turbo V8
>
>
> I'm planning to do a turbo v8 trans am with fuel injection. Does any one
> have a recommendation on an ecm for this project? (Possibly a car that
will
> donate the hardware too). I'd prefer something with hack info available.
>
> Thanks
>
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org