reset vector on a 68hc11

[Bill Shaw]

> what I'd like to do is get C source code, I know that in most places I'll
>have
>re-do the code. I'm using this as an educational type thing and IF I get C
>that
>will set the ecm up the same as the gm code ( read the same tables the
>same way >...)
>then tunning will be easier. And that would also make it possible to use a 730
>as a generic microcontroller ( try to find a single board computer that
>does all
>a 730 does for $35)

It might be quicker to just re-write the code in C.  Do you have an hc11
emulator?  It's really tough to get any significant piece of code running
without one.

I'm thinking about using a newer GP PCM like this,  with a 68332 and BDM
board from the EF332 project.

Bill