Parts sources ?

[Ward]

On Mon, 15 Mar 1999 18:27:56 -0800, Vance Rose wrote:

> Hi 
> 
> 	Hate to butt in on the thread - butt. I've been looking for an
inexpensive
> scanner. Please pass info off list to if ya want to sell it
> 
> Thanks Vance
> 
> At 03:11 PM 3/15/1999 -0500, you wrote:
> >Shannen,
> >	The OTC2000 is sold at Englishtown for $25 with one
> >cartridge. Problem is they only cover up to 90 or 91. The
> >ALDL port I want is from 96 & up. I assume they won't have a
> >cable for that.
> >
> >		Ken
> >
> >Shannen Durphey wrote:
> >> 
> >> Bruce Plecan wrote:
> >> >
> >> > -----Original Message-----
> >> > From: Padgett 0sirius <padgett at gdi.net>
> >> > To: gmecm at efi332.eng.ohio-state.edu
<gmecm at efi332.eng.ohio-state.edu>
> >> > Date: Saturday, March 06, 1999 12:49 PM
> >> > Subject: Parts sources ?
> >> >
> >> > >1) Anyone know where to buy the connectors used on the ALDL ?
> >> >
> >> > About the only way now is buying a really cheap scanner, and hacking
> the end
> >> > off,
> >> >   for OBD11, they are available, from Packhard, and John @  (916)
> 685-1055
> >> >   might be able to help you
> >> 
> >> I don't know what you're situation is, but you may be able to find
> >> garages that have an old OTC (say Slow-TC) 2000 monitor laying
> >> around.  These things are about as useful as a rev limiter on a baby
> >> carriage, and you may even end up with one for free.
> >> Shannen
> >
> >

Tak a look at Auto X Ray. Its sold by JC Whittney, Pep boys Kragen etc, I've
tryed it an I think it works well for pre OBD II card. Costs about $200.
Ward




_______________________________________________________
Get your free, private email at http://mail.excite.com/