peak-n-holds

[rr]

I get the feeling that being a sequential, one injector per driver,
that maybe the wiring is a smaller gauge. This would add a bit of
resistance to the circuit...

Still has to be hard on things.

BobR.


Bruce Plecan wrote:
> 
> -----Original Message-----
> From: Mike Pitts <mpitts at netspeak.com>
> To: 'gmecm at efi332.eng.ohio-state.edu' <gmecm at efi332.eng.ohio-state.edu>
> Date: Friday, March 19, 1999 5:22 PM
> Subject: RE: peak-n-holds
> 
> Well, kinda interests me.  at 2 ohms @  then each injector could draw about
> 7 amps, or during sudden accleration when all injectors are one for an
> instant
> could be drawing like 40ish amps.  Thats 2x the surge of the Peak + Holds.
> There must be something here..
> Bruce
> 
> >Bruce,
> >I'm pretty sure my injector wiring is fine.  I was
> >told the stock ECM would work for while, but I would
> >have to put a bigger fuse in the ECM fuse socket.  I
> >think I changed it from a 10A to a 20A.  Anyway, it
> >has been working okay and the ECM doesn't get too hot.
> >But why it works is really kinda moot because I am
> >going to upgrade to the proper drivers.
> >BTW: I have a couple extra ECMs in my garage as backups,
> >and I carry the DFI box with me in the trunk, just in
> >case. 8-)
> >-Mike