Peak-n-hold failure!

[David A. Cooley]

Just checked NTE's web site (http://www.nteinc.com/)
they have 10W 30 and 33V zeners, but they are only available in a D04 stud
mount package... Part numbers are NTE5202A (30V)
and NTE5203A (33V)
Their 5W are axial leaded and are NTE5141 (30V) and NTE5142(33V)

-----Original Message-----
From: Mike Pitts <mpitts at netspeak.com>
To: 'gmecm at efi332.eng.ohio-state.edu' <gmecm at efi332.eng.ohio-state.edu>
Date: Monday, March 22, 1999 1:47 PM
Subject: RE: Peak-n-hold failure!


>
><<As for the zener, the CS453 datasheet shows a 42V breakdown
>for the driver output transistor. You should use a 30 to 33
>volt zener @ 10W (10 W => that from data sheet).>>
>
>How about a 5W zener?  Digikey's zeners only go up to 5W
>from what I can tell viewing their web page.  No luck at
>JDR either.
>
>Thanks,
>-Mike
>
>
>