GM Serial Data

[Ward]

I'n not shure what your quesion is, beu you program your pc to as close to
8192 as you can get, As iI remember you can get to about 1% of 8192, Then
you send the proper interagation to the ECM and wait for the responce. 

Ithe is done on one pair, (2 wires).

Ward

On Sun, 28 Mar 1999 09:17:14 +1000, Ross Myers wrote:

> Hi All,
> 
> So it is that GM uses 8192baud, 1Stop & no Parity for Comms on later
PCM's.
> If I am looking at a data stream of this, how can I pick out the start
and
> stop bits from a data capture?. I've scanned the net for info on serial
> comms but to no avail.
> 
> Thanks
> 
> Ross Myers
> 





_______________________________________________________
Get your free, private email at http://mail.excite.com/