What IC in VSS buffer circuit GM.

[Dennis Bell]

Pat,

    Terry has volunteered to convert the file and post it. I've sent him the source file (off list) and with any luck he will post it to the ftp site. If he is unable to do this, I'll send the file to you and see if you have any luck. The Orcad version is 7.20.17 but the file formats may be the same as 7.11. There must be a utility that can convert
files from various formats instead of printing and then scanning the printout. Orcad can output to a dxf (Autocad) file. Should be some way to convert to jpeg or gif.

Thanks,

Dennis


Pat Ford wrote:

> Previously, you (Dennis Bell) wrote:
> > I believe the IC is a Delco only part. Haven't found a generic match to it. Functionally it is a buffer between the optical switch in the speedo head and the ecu and cruise control. I've traced out the schematic of the buffer from an 89 Caprice and have it in Orcad format. I don't have access to a scanner to provide it in a common file format.
>
> what version of orcad? I have a scanner and orcad(v7.11) here.
>
> --
> Pat Ford                           email: pford at qnx.com
> QNX Software Systems, Ltd.           WWW: http://www.qnx.com
> (613) 591-0931      (voice)         mail: 175 Terrence Matthews
> (613) 591-3579      (fax)                 Kanata, Ontario, Canada K2M 1W8