FAQ

[JTesta1966 at aol.com]

In a message dated 5/4/99 4:33:11 PM Eastern Daylight Time, dzug at delanet.com 
writes:

<< Examples:
 
 PE    <---Power Enrichment   (load)
 AE    <---Acceleration Enrichment  (accelerator pump )
 VE    <----volumetric Efficiency
 ESC   <---Electronics Spark Control
 LV8    <---Load as computer displays in a scaner
 IAC    <---Idle Air Control
 EGR DC   <---EGR Duty Cycle, for PWM EGR control
 Attack / recovery rates  <---the rate (speed...usually mS) at which an 
adjustment is made and removed
 AFR   <----Air Fuel Ratio
 WOT  <----Wide Open Throttle
 o2     <----Oxygen
 MAP   <---manifold Absolute Pressure (vacuum signal..used in conjunction 
w.TPS to decipher the load upon a engine)
 MAF   <--mass air flow  Used to figure how much fuel is necessary for air 
volume entering motor
 TCC   <---- Torque Convertor Clutch
 stoich  <---Stoiciometric AF ratio which is 14.7:1 AFR :-P

Surprized you didnt remember most of these from the GNTTYPE list Dave!

Jim